Distance between Wrexham and Mold
The distance from Wrexham to Mold is 19 kilometers by road. Road takes approximately 17 minutes and goes through Gwersyllt, Cefn-Y-Bedd, Caergwrle and Mynydd Isa.
Shortest distance by air | 17 km ✈️ |
Car route length | 19 km 🚗 |
Driving time | 17 min |
Fuel amount | 1.5 L |
Fuel cost | 2.2 GBP |
Point | Distance | Time | Fuel | |
53.04651, -2.99381 | 0 km | 00 min | 0.0 L | |
A541 5 km, 04 min
|
||||
Gwersyllt | 5 km | 04 min | 0.6 L | |
A541 3 km, 02 min
|
||||
Cefn-Y-Bedd | 7 km | 06 min | 0.9 L | |
A541 2 km, 02 min
|
||||
Caergwrle | 9 km | 09 min | 1.0 L | |
A541 7 km, 06 min
|
||||
Mynydd Isa | 17 km | 15 min | 1.6 L | |
A541 2 km, 02 min
|
||||
Mold | 19 km | 17 min | 1.7 L |
Hotels of Mold
Frequently Asked Questions
How much does it cost to drive from Wrexham to Mold?
Fuel cost: 2.2 GBP
This fuel cost is calculated as: (Route length 19 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.45 GBP / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Wrexham to Mold?
Driving time: 17 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 5 km with a maximum speed 96 km/h = 3 min
- 4 km with a maximum speed 80 km/h = 2 min
- 3 km with a maximum speed 64 km/h = 2 min
- 6 km with a maximum speed 48 km/h = 8 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Wrexham to Mold by land?
The distance between Wrexham and Mold is 19 km by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Wrexham and Mold respectively.
What city is halfway between Wrexham and Mold?
Where is Wrexham in relation to Mold?
Wrexham is located 17 km south-east of Mold.
Wrexham has geographic coordinates: latitude 53.04651, longitude -2.99381.
Mold has geographic coordinates: latitude 53.16887, longitude -3.14315.
Which highway goes from Wrexham to Mold?
The route from Wrexham to Mold follows A541.